farmsoft
Reduce food waste
5 Ways to Reduce Food waste using the Producepak food business management app

5 Ways to Reduce Food Waste

FREE TRIAL

5 Ways to Reduce Food Waste Right Now

“Sometimes the simplest lessons are the most groundbreaking.” That truth is over 30 years old, but its words still resonate loud and clear.

The goal of today’s post is to share a some surprising, yet logical ways to reduce inventory right now…

The key to reducing inventory is not to buy LESS; the key is to buy LATER. Teams that use this inventory reduction strategy and mindset will free up incredible amounts of capital for their organizations.

THE KEY TO INVENTORY REDUCTION IS NOT TO BUY LESS; THE KEY IS TO BUY LATER.

So as you might guess, the opposite absolutely holds true:

The key to raising service levels is typically not buying MORE; it is buying EARLIER. Perhaps we’ll save that breakdown for another day. Here we’ll explore ‘buying later’ as a strategy to reduce inventory and challenge you to see if there’s opportunity to do so in your organization.

How to reduce inventory in supply chain planning: those first few days

Let’s start with a quick word about your initial days using an advanced supply chain planning solution. Most companies experience a dramatic and welcome inventory reduction when they first move from the world of old buying reports and spreadsheets to a best-in-class inventory planning solution. The advanced forecasts offer dramatic results as expected, and the proper safety stock amounts finally being placed on each item often offer a shocking inventory reduction.

This common benefit is based on the fact that most companies carry too much safety stock on their fast-moving, or smooth ‘A’ items. Once those victories are realized, much more opportunity typically unfolds. Even a strong team with an advanced inventory planning and replenishment solution will continue to see deeper results as they increase their knowledge and be more open to coaching and growth.

When safety stock gets inflated, here’s why

The issue is all about the difference between a balanced vendor line and an unbalanced vendor line.

If you have one item in your vendor, your line is balanced. You replenish when that item reaches its low stock point or reorder point. You replenish it to the order-up-to level (OUTL). If your order cycle is 21 days, in about 3 weeks, that item will deplete again to the low stock point, and you start the cycle over again.

However, you normally have multiple items in the line. With strong forecasts, proper safety stocks, correct lead times and an order cycle strategy, the items have a strong chance to work together in rhythm and deplete at a similar rate.

If these components are incorrect, or unknown, you may believe you are buying them all up to the same 21-day OUTL. But actually, they are all sitting at very different time supplies. When this is the case, some items will reach their low stock points and likely trigger the order early. Your replenishment solution then works to buy everything up to the same level. This includes ‘topping off’ items that are only days below their OUTL.

The result is the unfortunate picture that you never let your items deplete down to where they want to be ordered. Add in the common need to hit a vendor’s required minimum order quantity (MOQ), and the inventory can really inflate.

Read more about replenishment optimization

Where food is wasted

  • Misshapen, marked, discoloured or oddly sized fruit and vegetables that don’t
 meet the standards of the marketplace (up to 20-40%) are thrown away before even leaving the farm.
  • Some food goes off when transported.
  • Offcuts and foods past their use-by dates are binned by both retailers and by us at home. (In developed countries, this kind of waste is the greatest proportion of food lost.)
  • Cooked, uneaten food is binned.
box of salad vegetables

How we can waste less food

  • We should eat all shapes and sizes: ‘Ugly’ fruit and veg is sold by box schemes like London-based Oddbox who also give their surplus to food banks via City Harvest and wonkyvegboxes.co.uk do something similar in the Leicestershire area.
  • Companies can use ‘ugly’ fruit and vegetables in their products: Imperfect fruit and veg is used in drinks, jams, chutneys, hummus and snacks by companies such as Rubies in the Rubble, Waste Not, Rejuice, Snact, ChicP, awesomedrinks.com, Dash Water and more.
  • We should use it to make other resources: An increasing amount of food waste is being sent to be composted – so it’s put back into the soil – or to anaerobic digestion facilities where it is broken down and converted into gases, creating a source of renewable energy.

According to the latest figures from WRAP, by weight, household food waste makes up around 70% of the UK post-farm-gate total. They estimate that by cutting food waste each household could save up to £700 per year as well as making less waste.

Top 5 ways to cut down on food waste

  1. Don’t over buy. Keep track of what you’ve bought and used. WRAP suggests taking a ‘shelfie’ – a photo of your fridge and cupboards to remind you of what’s there.
  2. Check the use-by dates of fresh food when you buy it. These are the dates to take notice of, rather than the best-before dates. Only buy what you can use before it expires.
  3. Plan ahead. Think about what you’re going to cook and how you’ll use the leftovers.
  4. Get to know your grocer. They will have plenty of advice on how to use up leftover veg.
  5. Love your freezer. Use your weekends to batch-cook and freeze. There are plenty of freezing tips in our guide.

You can also consider home composting.

How we’re tackling food waste at Good Food

We test around 80 recipes a month as well as making videos and taking pictures of food and products that come in all sorts of packaging, and we also make waste as we cook.

To tackle this, we eat all of the food that comes out of the test kitchen within the company, so when we talk about waste, we mean peelings, offcuts and – on the rare occasion that a recipe goes horribly wrong and is inedible – a complete dish. Each Friday staff take unused ingredients home and we challenge our cookery assistant Liberty to make lunch using as many leftovers as possible.

Vegetables on a chopping board


Here’s how our magazines editor got on when challenged to reduce his household food waste over two weeks…

How I reduced food waste

Keith Kendrick, magazines editor: “As a dad and a foodie, I’m used to cooking family meals. I batch cook the kids’ meals, but prefer to cook on a whim for my wife and me. We normally throw out three small caddy-sacks of food waste a week. My strategy was two-fold: planning meals and creative use of leftovers.”

Week one

Whole roasted cauliflower in an oven dish with salad


“I wrote out two plans for the week – one for kids, one for adults – and ordered lots of ingredients. At the weekend, I cooked the kids’ weeknight meals, plus a dozen jars of soup for my wife and me to take to work. Ever tried roasting a whole cauliflower, stalks and all, then blitzing it with coconut milk and spices? Delicious! I used the stalks of kale and broccoli, too – lovely when roasted with Marmite. Our Sunday chicken provided enough leftovers to make a curry, a salad and sandwiches for the kids. We still had a fair bit of waste, but none of it could’ve been eaten.”

Week two

Rustic vegetable soup in a pot with a spoon


By week two, we had a rhythm – whatever my kids didn’t finish for dinner, my wife had for lunch the next day. The problem? She wasn’t eating the soups I had so lovingly prepared! I thought about freezing them, only my freezer was already full. It was time for an inventory. I took everything out, which provided the meals for the week. Overall, there were only two disasters: a lasagne declared ‘inedible’ by my wife, and a vegan, gluten-free pie that tasted like plasterboard – a total of 263g of food that we could have eaten. All other waste was unavoidable, and we went from three caddy-sacks to two per week.

The verdict

A success… sort of. Planning was fun, and knowing that 96% of what we threw away was unavoidable made me feel good. However, as a spontaneous cook, it was stifling to plan meals so far in advance. The way forward for us is balance – planning the kids’ meals ahead, with more educated portion sizes, and deciding on the day what my wife and I fancy for dinner, with one eye on the leftovers.

More on how to reduce food waste

How to reduce food packaging waste
Leftovers recipes: How to use up commonly wasted ingredients
5 nights of waste-free family meals
How to freeze food
Freezable batch-cook recipes
How to safely reheat leftovers

Replenishing too early is like purchasing a full-cart grocery list every time you walk into the store just because you ran out of bread early. Your refrigerator would work overtime!

5 Ways to Reduce Fresh Produce Inventory Waste Right Now
5 Ways to Reduce Fresh Produce Inventory Waste Right Now

Reasons why we replenish too early

Reducing Wasted Food At Home

Two pictures, one on top of the other, showing perishable foods and wasted food

Most people don't realize how much food they throw away every day — from uneaten leftovers to spoiled produce. EPA estimates that in 2018, about 68 percent of the wasted food we generated—or about 42.8 million tons-- ended up in landfills or combustion facilities. By managing food sustainably and reducing waste, we can help businesses and consumers save money, provide a bridge in our communities for those who do not have enough to eat, and conserve resources for future generations.

On this page:

Benefits of Reducing Wasted Food

Helpful Links

  • Saves money from buying less food.
  • Reduces methane emissions from landfills and lowers your carbon footprint.
  • Conserves energy and resources, preventing pollution involved in the growing, manufacturing, transporting, and selling food (not to mention hauling the food waste and then landfilling it).
  • Supports your community by providing donated untouched food that would have otherwise gone to waste to those who might not have a steady food supply.

Ways to Reduce Wasted Food

Planning, prepping, and storing food can help your household waste less food. Below are some tips to help you do just that:

Planning Tips

shopping cart with colorful fruits and vegetables in it

By simply making a list with weekly meals in mind, you can save money and time and eat healthier food. If you buy no more than what you expect to use, you will be more likely to keep it fresh and use it all.

  • Keep a running list of meals and their ingredients that your household already enjoys. That way, you can easily choose, shop for and prepare meals.
  • Make your shopping list based on how many meals you’ll eat at home. Will you eat out this week? How often?
  • Plan your meals for the week before you go shopping and buy only the things needed for those meals.
  • Include quantities on your shopping list noting how many meals you’ll make with each item to avoid overbuying. For example: salad greens - enough for two lunches.
  • Look in your refrigerator and cupboards first to avoid buying food you already have, make a list each week of what needs to be used up and plan upcoming meals around it.
  • Buy only what you need and will use. Buying in bulk only saves money if you are able to use the food before it spoils.

Storage Tips

It is easy to overbuy or forget about fresh fruits and vegetables. Store fruits and vegetables for maximum freshness; they’ll taste better and last longer, helping you to eat more of them.

  • Find out how to store fruits and vegetables so they stay fresh longer inside or outside your refrigerator.
  • Freeze, preserve, or can surplus fruits and vegetables - especially abundant seasonal produce.
  • Many fruits give off natural gases as they ripen, making other nearby produce spoil faster. Store bananas, apples, and tomatoes by themselves, and store fruits and vegetables in different bins.
  • Wait to wash berries until you want to eat them to prevent mold.
  • If you like to eat fruit at room temperature, but it should be stored in the refrigerator for maximum freshness, take what you’ll eat for the day out of the refrigerator in the morning.

Prep Tips

fruits and vegetables

Prepare perishable foods soon after shopping. It will be easier to whip up meals or snacks later in the week, saving time, effort, and money.

  • When you get home from the store, take the time to wash, dry, chop, dice, slice, and place your fresh food items in clear storage containers for snacks and easy cooking.
  • Befriend your freezer and visit it often. For example,
  • Freeze food such as bread, sliced fruit, or meat that you know you won’t be able to eat in time.
  • Cut your time in the kitchen by preparing and freezing meals ahead of time.
  • Prepare and cook perishable items, then freeze them for use throughout the month.
  • For example, bake and freeze chicken breasts or fry and freeze taco meat.

Thriftiness Tips

Be mindful of old ingredients and leftovers you need to use up. You’ll waste less and may even find a new favorite dish.

  • Shop in your refrigerator first! Cook or eat what you already have at home before buying more.
  • Have produce that’s past its prime? It may still be fine for cooking. Think soups, casseroles, stir fries, sauces, baked goods, pancakes or smoothies.
  • If safe and healthy, use the edible parts of food that you normally do not eat. For example, stale bread can be used to make croutons, beet tops can be sautéed for a delicious side dish, and vegetable scraps can be made into stock.
  • Learn the difference between “sell-by,” “use-by,” “best-by,” and expiration dates.
  • Are you likely to have leftovers from any of your meals? Plan an “eat the leftovers” night each week.
  • Casseroles, stir-fries, frittatas, soups, and smoothies are great ways to use leftovers too. Search for websites that provide suggestions for using leftover ingredients.
  • At restaurants, order only what you can finish by asking about portion sizes and be aware of side dishes included with entrees. Take home the leftovers and keep them for or to make your next meal.
  • At all-you-can-eat buffets, take only what you can eat.

Top of Page

Toolkit for Your Home and Your Community

The Food: Too Good to Waste Toolkit will help you figure out how much food is really going to waste in your home and what you can do to waste less. By making small shifts in how you shop for, prepare, and store food, you can save time and money, and keep the valuable resources used to produce and distribute food from going to waste!

Food: Too Good to Waste also contains an Implementation Guide that is designed to teach local governments and community organizations how to implement a Food: Too Good to Waste campaign in their community using the Toolkit.

Top of Page

If You Can't Reduce Wasted Food, Divert It From Landfills


We would probably all agree that this happens more than we’d like to admit. If you want to kick this costly habit, let’s start by creating a list of the pitfalls that trigger us to place replenishment orders too early:

  1. Avoid Cushioned Lead Times

Hey, we’ve all been there. A little cushion is understandable. However, you have to know the impact of that on your inventory investment.

If you are sitting on 3 or 4 days of cushion, those 3 or 4 days act as extra safety stock days and the dollars can add up.

Start by always knowing this key number:  What is 1 day of inventory in dollars (or your currency) for your business? If 1 calendar day of inventory is $250,000, then 4 days of cushion is $1,000,000.

By reducing that cushion, you will reduce that secret safety stock and you will replenish later, on the next order or beyond. The inventory will drop.

  1. Avoid Fixed Cycle Buying

There are several reasons to set up suppliers for replenishment on a fixed cycle. Some of those reasons are good; many are not. Hopefully, you are being compensated by your supplier in such a strong way that it exceeds the added inventory expense.

Let’s say you set the supplier to replenish on Wednesdays. Typically, the line does not actually come ‘due’ on that chosen Wednesday. It will most likely either come due before that Wednesday or after. Therefore, you establish the rules in a way to replenish the previous Wednesday or the Wednesday after.

We know which it will be! If you ever tried risking things a bit, you probably got burned and you won’t let that happen again. You will always replenish the line early. The result is that the inventory stays higher than it would if you removed the fixed cycle rule.

In addition, you might have to hit a supplier minimum bracket. Let’s say, for example, that bracket is a truckload. And of course, you don’t control the size of the truck. You also don’t control the fact that it takes 10 days to sell a truckload of product based on your forecasts.

So every time you buy, you are buying 10 days of supply. Despite sitting on 3 days of excess inventory, you replenish again next Wednesday. Now you have 6 days excess. You do this a few times until you can feel the excess and then you ‘skip a week,’ which is a common practice.

Though you probably don’t watch the build of inventory during these weeks, the build-up is happening. Inventory analysts who have experienced the opportunity to remove fixed cycle rules on lines like these can share plenty examples of the dramatic inventory reduction that follows.

  1. Avoid High Buying Multiples

We can all agree that the slow-moving items will often buy far above your OUTL because of typical buying multiples. An item with a forecast of 1 and a buying multiple of 6 has no option but to replenish up to 6 months’ supply. Fortunately, most of those items do not have a heavy impact on your inventory investment.

However, if your A and B items also have high buying multiples, you might find that you often ‘top off’ items far above the OUTL. Let’s stick with our supplier line that has a 21-day order cycle. If an A item is only sitting 7 days below the OUTL upon the purchase of the line, and the item has a 17-day buying multiple, it will extend 10 days past the OUTL.

You should maintain a continuous analysis of Buying Multiple days across your item groups and item forecast ranges. Buying Multiple Days should become a common measurement and reporting guide to the team.

In addition, don’t forget to include a study of large Minimum Quantities and Manual Minimums.

  1. Avoid Overreacting to Item Checks

Today’s supply chain planning solutions provide timely and relevant information. However, when you move from an antiquated process to an advanced process, you have to avoid the temptation to overreact.

Your replenishment system might have the ability to show you every item that could potentially run into trouble; however, you can’t afford to hit the panic button every time the system tells you to react to a situation.

You may have gone years without seeing these items, so you better have a smart inventory reduction strategy for how you react to the information.

Once example is the ability to see Low Stock Point checks. You might have a supplier of 100 items. Very possibly, a handful of items will reach their Low Stock Point well ahead of the rest of the line. These are often slow-moving, low-impact items that might suddenly sell 3 months’ supply after having not sold any for 3 months.

The line might still be in fine shape, but the items show up as a warning. Given that you prefer to keep your warning list clean, you replenish the line much earlier than you planned. The system does not want to replenish again for one full order cycle, so it takes along many items that were not yet sitting in a position of need. Thus, you ‘top off’ the rest of the line. Doing this often ensures that your inventory will always stay high.

Result: buying too early and tying up capital along the way.

  1. Avoid Demand Forecasting Inaccuracies
5 Ways to Reduce Fresh Produce Inventory Waste Right Now
5 Ways to Reduce Fresh Produce Inventory Waste Right Now

The category of demand forecasting is a big one, so we’re breaking it down into 3 parts:

  1. Overall demand forecasting,
  2. Seasonal forecasting, and
  3. New Item forecasting

Forecasting overall items

Your supply chain planning solution wants to bring you into the demand conversation from time to time. It delivers report cards to you and offers exception-based replenishment optimization tools. It wants you to continually work together toward excellence.

If you don’t play your part of the equation, you might never see the full potential for demand forecasting accuracy that is possible.

Remember, the demand forecast is the most important component, as it combines and influences every other replenishment component. When you replenish everything up to a common order-up-to level, you want to trust that strong demand forecasts will ensure that the line depletes down as close together as possible.

With poor demand forecasting, the 21 days of supply level which you believe you are buying might actually be a much different time supply on numerous items. The result can be an order triggered much earlier than planned.

Forecasting seasonality

Perhaps the perfect example of a poor component that puts a line out of balance is the lack of quality Seasonal Demand Profiles on items with true seasonality. For many demand planning analysts, forecasting seasonality is one of the last areas to master. That is understandable, but it does not reduce the need for quality Demand Profiles.

One of the common ways the analysts find seasonality in items with surprising seasonality is when they continue to hit their Low Stock Points ahead of the rest of the line during their season. In fact, close attention should be paid to Trending Item Exceptions, as item seasonality is sometimes misdiagnosed as a trend.

This topic points to the advantages of a world-class supply chain planning solution that helps you easily understand and find seasonal patterns, and then apply the proper Demand Profiles.

New item forecasting

New items continue to be an area of poor performance for many inventory teams and analysts.

Demand forecasts on new items require a similar level of attention you’d give to an infant. We recently blogged about New Item Excellence, where we encouraged the “3X strategy” which says that:

IF 5% OF YOUR ITEMS ARE NEW, THEY REQUIRE AT LEAST 15% OF YOUR INVENTORY PLANNING ATTENTION.

Poor initial forecasts, or a lack of close attention in their early weeks, can cause items to reach their Low Stock Points early and potentially be a source of buying too early.

Watch your Average Delay Days

When you replenish a ‘Due’ supplier, what is the $Average Delay Days on the line? Create a visual of the line and start to watch where the average inventory sits when you place the order.

Continue to watch that value when you replenish the line to see if you are bringing the inventory down or if it is moving up. For more on inventory analytics, listen to the podcast: “10 Inventory Analytics Numbers Every Exec Should Care About.”

5 Ways to Reduce Fresh Produce Inventory Waste Right Now
5 Ways to Reduce Fresh Produce Inventory Waste Right Now

What are your potential savings?

As we said earlier, numerous inventory teams have made this a great area of focus and analysis. They found they were often replenishing too early, refined and improved their awareness, and reduced millions of dollars of inventory across teams.

How digitalisation of the supply chain will reduce global food waste

To combat the global food waste crisis, the supply chain must look towards adopting a digitalized approach.

Dr Felix Flemming from TOMRA Food, has investigated why a digital transformation can help reduce food waste and loss.

The scale of the global food waste problem is staggering. According to reports, 1.6 billion tons of food are lost or wasted every year, equating to a total value of $1.2 trillion being wiped from the supply chain. With one-third of the total amount of food produced globally being misused, the industry needs to look towards innovation and digitalization to combat this ever-growing trend.

Through embracing technology and digitalizing the food supply chain, a move can be made towards reducing the amount of food waste and loss within the industry. Not only that, but it can also help ensure there’s enough resource to sustainably support the future global population.

With the UN’s Sustainable Development Goals setting a target of halving food loss and waste by 2030, I’ve looked at how the digitalization of the supply chain could help decrease global food waste.

5 Ways to Reduce Fresh Produce Inventory Waste Right Now
5 Ways to Reduce Fresh Produce Inventory Waste Right Now

Main topics of investigation:

The need for innovation to reduce waste

Utilizing IoT in the supply chain

Using innovation to improve current infrastructure

Going digital to fight food waste

Click here to read the full report

PMA virtual town hall: industry efforts to fight food waste and loss

Tackling food waste becomes even more important during pandemic

Food waste has been a topic that has received much coverage in the media in the past months, especially due to the increased need for food in some communities due to the pandemic. That is why this week’s PMA virtual town hall focused on the industry’s efforts in fighting food waste and loss.

Holistic, all-in approach proves effective
According to this week’s panelists, the biggest motivation for working to reduce food waste is personal values and passion. While governmental legislation can make the process easier, the companies who are driven by their own passion for food waste reduction are always going to be ahead of the curve. The biggest reason for governments to put legislation in place to aid the fight against food waste and loss is to level the playing field – to ensure that those companies who aren’t working to reduce their waste are forced to do so. But overall, legislation is not the driver for change, that change comes from within, says one panelist.

Tackling food waste is an enormous task. One of the biggest investments required is that of time. The waste needs to be addressed holistically rather than independently from one another. Making independent changes throughout a company might have an adverse effect. For example, a packaging improvement might bring a negative outcome for the product’s shelf-life. That is why it is important to follow specific programs, to be all-in, rather than make small changes here and there. There will be monetary investments as well, such as trainings for the staff. The most important aspect to consider is that all levels of the team need to be fully involved for the process to be effective. In order to achieve zero-waste certification, to really address the issues and inefficacies, and to bring about the most cost savings, the work needs to be done at all levels.

5 Ways to Reduce Fresh Produce Inventory Waste Right Now
5 Ways to Reduce Fresh Produce Inventory Waste Right Now

Food waste during the pandemic
In the pandemic, food waste was a topic that was highlighted because the temporary loss of the foodservice industry made it so that a lot of products weren’t distributed, and sometimes weren’t even harvested. In addition to this, the change in consumption and purchasing patterns from the consumers also made it difficult for the industry to plan how much volumes to supply and when to do so. The initial raise in sales dropped back down, and extra product that was supplied to cover shortages became redundant. This has shown the importance of strong forecasting and ordering tools to help prevent food waste. Navigating the reopening of the foodservice industry throughout the US, will be the next challenge.

Steps to take
At a retail level, there are many steps that can be taken to help reduce food waste. Using a strong forecasting and ordering tools to help improve inventory flow, for example. The store fixtures should be set up in a way that helps to increase turnover and customer appeal. Store associates should to be provided with resources and education on how to care for the foods and manage the shelf-life. Finally, standardized date labeling is very important. Dates are often required for quality reasons only, but packages that have a ‘best by’ date help consumers know when to eat it and help to eliminate food loss and waste in the home – which is one of the biggest places where food loss occurs.

Food that can’t be distributed through its normal channels should be redirected to a different outlet. Keeping the food destined for human consumption is often the main goal – this can be done by bringing it to foodbanks, for example. If that doesn’t work, the next step is to designate it for animal consumption by turning it into feed. Then, if that doesn’t work, it’ll be turned into energy. While it is often seen as a last resort to use the food as a soil regenerator, one of the panelists pointed out that this is something that should be valued and be seen as an opportunity rather than as a last resort; it helps us to rebuild soil without chemicals and brings about a regenerative system that uses 100% of the food in the systems.

Next week’s virtual town hall will focus on the global impact of COVID-19. Panelists will look at how key regions have been affected and look to the future of essential global markets, the impact of ongoing consumer concerns, and the need to anticipate supply and demand challenges. Click here to sign up for next week's virtual town hall.

Spain: Pilot project to reduce food waste

According to figures from the European Commission, every year 100 million tonnes of food are thrown away in Europe, and this figure could reach 120 million by 2020. It is estimated that the food resources that are lost or wasted might be enough to feed all the hungry people in the world twice over. Food waste is also the third largest emitter of carbon in all EU countries.


The CREDA (Research Centre for Agro-food Economy and Development of IRTA and the UPC) is one of the partners of the REFRESH project (Resource Efficient Food and Drink for the Entire Supply Chain), funded by the European Union in the framework of the Horizon 2020 program. Its aim is to compile a broad scientific knowledge that can serve to analyse the keys to food waste in all stages of the value chain, and to design practical strategies to reduce it in the future. REFRESH aims to contribute to reducing food waste across the EU by 30% by 2025 while reducing waste management costs and maximising the value of unavoidable food waste and of the packaging material.

5 Ways to Reduce Fresh Produce Inventory Waste Right Now
5 Ways to Reduce Fresh Produce Inventory Waste Right Now


Pilot project in Spain

Spain is one of four pilot countries of the project, together with Hungary, Germany and the Netherlands. CREDA (UPC-IRTA) is working on a qualitative study of practices, perceptions and motivations of consumers in these regions, while analysing the understanding of the information provided in packaging and the acceptance of food waste as a by-product. Moreover, it is compiling qualitative data using a common methodology to understand household waste in its entirety.


In parallel, the project aims to create a platform formed by the key players in the food chain (producers, distributors, industry, social organizations, consumer associations and public institutions), which will use the results of the pilot projects to develop protocols to be applied at European level.


The pilot project in Spain has the participation of a number of important industry organizations, administration and associations:


• Mercabarna

• Espigoladors

• Banc d'Aliments (Food bank)

• ARC (Waste Agency of Catalonia)

• AMB (Metropolitan Area of Barcelona)

• PAA (Platform Aprofitem els Aliments)

• ADICAE (Association of Bank, Savings bank and Insurance Users)

• FIAB (Spanish Federation of Food Industries)

• ASEDAS (Spanish Association of Distributors, Self-service stores and Supermarkets)

• FCAC (Federation of Agricultural Cooperatives of Catalonia)

• AECOC (Association of Manufacturers and Distributors)

• HISPACOOP (Spanish Confederation of Consumer and User Cooperatives)


The project, which started a year ago, addresses the problem of food waste from an interdisciplinary perspective (politics, economics, consumer behaviour, environment, communication, etc.) and has 2019 as the year when the final results will be published. REFRESH brings together 26 research centres and offices in 12 European countries and China.


FREE TRIAL

Producepak food manufacturing app

Read more
Read more
Read more
Read more
Read more
Read more
Read more
Read more
Read more
Read more
Read more

Producepak provides a simple solution for food manufacturers, processors, food packers, fresh produce packers, pack-houses, fruit & vegetable packers, and food packers. Producepak concentrates on food safety, food inventory control, food expiry management, first in first out stock rotation, food order management, food production management in batches, food shipping & sales, food export / import. Use the Producepak Quality Control module to improve food safety, or turn on a simple food safety checklist to ensure consistent quality food packing and production.

Producepak food manufacturing app is a simple to use solution for buying, and selling food inventory, fresh produce, seafood, meats, and flowers. The traceability built into Producepak provides instant recalls, accurate food traceability, and easy to produce audits, and mock audits. Producepak provides tools to pack food, fresh produce, flowers, and hops. You can use Producepak for food manufacturing, configure the bill of materials for each food product line you manufacture, and manage the food manufacturing process by projecting required raw ingredients requirements and scheduling batches and purchase orders for raw food manufacturing processes. Accurate fresh produce inventory management reduces waste through better FIFO stock rotation, stock-takes, and inventory alerts.

Increase the efficiency of food inventory using options like scanning incoming bar-codes to reduce data entry & errors. Guarantee food quality with quality control testing systems. Customer feedback management, supplier quality, customer qulity standards.

Producepak food manufacturing app can project required inventory (and shortages), schedule orders to be packed in batches , automatic alerts to production line managers, inventory teams telling them which inventory needs to be moved to which production line; guarantees the correct product and quantity is packed on time. Shipping teams are guided through the dispatch process from picking using a phone or tablet (optional bar-code scanning), automatic picking, thru bill of lading, invoice, and automatic shipping notifications for customers, transport, and sales teams. Automatic generation of food labels, bill of lading, invoice, picking documents and more; reduces administrative burden. Easy audit & recall systems reduces compliance costs.